MODULAR AMPLIFIER TECHNOLOGY.
The AMS amplifier systems from BMC Messsysteme GmbH can be equipped with different plug-in cassettes of the AMS-K series - just so easy and comfortable.
THE RIGHT CONNECTION.
The available plug-in cassettes have different connectors on the front panel. Depending on the sensor or signal to be connected, the suitable cassette can be chosen.
The 5B modules are placed on the assigned position of the cassette and screwed to the panel. Via the small bore holes at the relevant position on the front panel, the potentiometers of the 5B modules can still be reached for calibration even after being mounted into the AMS device.
PLUG-IN. SCREW TIGHTLY. DONE.
The equipped individual cassettes are pushed along guide bars into the AMS device, plugged into the backplane with the front panel being screwed tightly to the AMS housing. Unneeded slots are covered by a blank panel (see picture).
IT'S ALL IN THE COMBINATION.
As the cassettes equipped with different 5B modules can be used in any combination, the AMS amplifier system can perfectly be adapted to the measuring task.
VERSIONS. SOMETHING FOR EVERYBODY.
AMS devices are available in two sizes: as a mobile tabletop unit in 42HP format, or as a stationary 19'' rack system in 84HP format.
The following cassettes with front panels and connectors are available:
|AMS-K-BIN5||with 5-pin Binder female (712 series)|
|AMS-K-BNC||with BNC female connector|
|AMS-K-CO5||with 5-pin terminal connector (requires 5-pin screw-type terminal blocks ZU5ST)|
|AMS-K-THK||with thermocouple connector type K|