Our measurement products are often used by our customers still years
after they made way for an innovative product. The bmcm product archive provides access to the documentation of products which celebrate their "retirement ".
| Product |
Description |
Follow-up product |
Rev. no. |
Size |
|
| AAB |
analog amplifier box with 25-polie Sub-D female connector and 6..15V input range (German) |
AAB-II |
2.0 |
263kB |
 |
| AAB-II |
power supply 9..30V instead of 9..40V at present |
AAB-II |
3.1 |
426kB |
|
| AP2 |
power supply 9..30V instead of 9..40V at present |
AP2 |
1.1 |
337kB |
|
| AP8 |
power supply 9..30V instead of 9..40V at present |
AP8 |
3.1 |
337kB |
|
| ASL-B1 |
active acceleration sensor 0-5V, ±10G |
SC-A100 |
2.2 |
278kB |
|
| ASL-L2 |
active light sensor 0-5V, 0-25µW/cm² |
SC-L25 |
2.3 |
183kB |
|
| ASL-M9 |
active magnetic field sensor 0-5V, ±900G |
SC-M1000 |
2.2 |
278kB |
|
| ASL-P1 |
active pressure sensor 0-5V, ±1bar |
SC-P50 |
2.3 |
183kB |
|
| ASL-T1 |
active temperature sensor 0-5V, 0-100°C |
SC-T100 |
2.3 |
183kB |
|
| ASL-T2 |
active temperature sensor 1.5-4.5V, 0-100°C |
SC-M1000 |
2.2 |
278kB |
|
| BP2 |
power supply 9..30V instead of 9..40V at present |
BP2 |
1.0 |
243kB |
|
| BP2-BOX |
power supply 9..30V instead of 9..40V at present |
BP2-BOX |
1.0 |
243kB |
|
| BP16 |
70mA excitation instead of 100mA at present |
BP16 |
3.3 |
521kB |
|
| BP16-PC |
70mA excitation instead of 100mA at present |
BP16-PC |
3.3 |
521kB |
|
| BPL-PC |
backplane without the features of bridging measuring amplifier slots via jumpers
and leading out the excitation voltage (available until July 2001, German)) |
BP16-PC |
2.0 |
252kB |
|
| BPL-II |
In May 2002, we went over the first version of the carrier board providing for an additional connection for the temperature reference
input and for the alternative supply from connected DAQ systems. |
BP16 |
3.1 |
388kB |
|
| BPL-II |
power supply 9..30V (internal: ±7.5V) instead of 9..40V
(internal: ±9V) at present |
BP16 |
3.2 |
435kB |
|
| BPL-II-PC |
In May 2002, we went over the first version of the carrier board providing for an additional connection for the temperature reference
input. |
BP16-PC |
3.1 |
388kB |
|
| BPL-II-PC |
power supply 9..30V (internal: ±7.5V) instead of 9..40V
(internal: ±9V) at present |
BP16-PC |
3.2 |
435kB |
|
| ePC-CB |
carrier board on PC/104 basis (substituted by ETX version in March 2008) |
ePCII-CB |
2.4 |
637kB |
|
| ePC-DP |
The intelligent LCD display has not been available since June 2010. |
- |
2.1 |
739kB |
|
| ePC-QUAD |
The first series of the embedded PCs based on PC/104 has been substituted by an ETX version in March 2008. |
ePCII-QUAD |
2.5 |
448kB |
|
| ePC-QUAD-LOG |
data logger on PC/104 basis featuring both an analog and a digital PC/104 measuring card (ETX version from March 2008 on) |
ePCII-LOG |
2.5 |
1.01MB |
|
| iM805 |
self-sufficient data acquisition system (German) |
iM-AD25a |
2.2 |
271kB |
|
| iM1610 |
self-sufficient data acquisition system |
iM-AD25a |
2.2 |
689kB |
|
| iM1610 Logger |
data logger extension for IM1610 (German) |
- |
2.2 |
64kB |
|
| iM1610a |
self-sufficient data acquisition system with the additional feature
to save 240k sampled values (German) |
iM-AD25a |
2.2 |
762kB |
|
| iM3250 |
TCP/IP based intelligent frontend system;
netzwork connection: AUI; BPL-PC with integrated measuring amplifiers MVL (German) |
iM3250T |
2.2 |
421kB |
|
| iM3250T |
power supply 9..30V (internal: ±7.5V) instead of 9..40V
(internal: ±9V) at present |
iM3250T |
3.0 |
508kB |
|
| iM-AD25 |
LAN data acquisition system with power supply 9..30V and ±5V measuring range |
iM-AD25a |
3.0 |
557kB |
|
| iMCO |
terminal board for the connection of active and passive sensors to
the devices by BMC Messsysteme GmbH (German) |
ZU37xx |
1.0 |
152kB |
|
| iMCO-II |
terminal board with input plugs for iM-devices, µMeter4/8a and
PC measuring cards to connect active and passive sensors (German) |
ZU37xx |
1.0 |
96kB |
|
| LIN |
calibration tool with voltage reference to test measuring amplifiers and DAQ systems |
- |
1.0 |
89kB |
|
| MAD12 |
analog input module (12 bit, max. 100kHz)
for PCI-BASE50/300, PCI-BASE1000 and PCI-BASEII, PCIe-BASE |
MAD12a |
4.1 |
305kB |
|
| MAD12f |
analog input module (12 bit, max. 333kHz)
for PCI-BASE300, PCI-BASE1000 and PCI-BASEII, PCIe-BASE |
MAD16f |
4.1 |
305kB |
|
| MAD16 |
analog input module (16 bit, max. 100kHz)
for PCI-BASE50/300, PCI-BASE1000 and PCI-BASEII, PCIe-BASE |
MAD16b |
4.1 |
305kB |
|
| MAD16a |
analog input module (16 bit, max. 100kHz)
for PCI-BASE300, PCI-BASE1000 and PCI-BASEII, PCIe-BASE |
MAD16b |
7.0 |
399kB |
|
| MA-FU |
frequency/voltage converter available until app. October 2001 still
with thresholds of 0.6V and 6V and 50mV input sensitivity |
MA-FU |
1.3 |
236kB |
|
| MAL-UI |
Until March 2005, the miniature measuring amplifier did feature the 5V excitation. |
MAL-UI |
4.1 |
227kB |
|
| MA-U |
Since January 2001, we have been delivering our 5B amplifier modules with new housings. Few changes concerning the configuration of the modules
were the result. The modules of the previous series R43 can be recognized
by the reverse positon of the DIP switches. |
MA-U |
4.4 |
265kB |
|
| MA-UI |
Since January 2001, we have been delivering our 5B amplifier modules with new housings. Few changes concerning the configuration of the modules
were the result. The modules of the previous series R43 can be recognized
by the reverse positon of the DIP switches. |
MA-UI |
4.4 |
275kB |
|
| MA-UI |
5B modules available until June 2004 feature 0.5% current measuring
accuracy. |
MA-UI |
6.0 |
434kB |
|
| MA-UNI |
Since January 2001, we have been delivering our 5B amplifier modules with new housings. Few changes concerning the configuration of the modules
were the result. The modules of the previous series R43 can be recognized
by the reverse positon of the DIP switches. For the MA-UNI, a user manual
(1.10MB, German) is provided in addition. |
MA-UNI |
4.4 |
340kB |
|
| MA-UNI |
5B modules available until June 2004 feature 0.5% current measuring
accuracy. For this version an extensive user
manual (1.10MB) is also provided. |
MA-UNI |
6.0 |
235kB |
|
| meM-AD |
first generation of the analog USB data acquisition system available till February 2002 |
USB-AD |
3.2 |
228kB |
|
| meM-ADDA |
The USB data acquisition system has been discontinued since November 2005 and been replaced by a compact follow-up product in Sub-D connector design. |
USB-AD |
3.3 |
296kB |
|
| MDA12-4 |
The 16-bit version of the analog output module features isolated outputs (from the PC ground). |
MDA16-4i |
3.0 |
255kB |
|
| MDA16 |
The successor of the analog output module features isolated outputs (from the PC ground). |
MDA16-2i |
3.0 |
243kB |
|
| meM-ADf |
The USB data acquisition system has been discontinued since February 2002. It can easily be replaced by meM-ADfo featuring all functions of the meM-ADf. |
meM-ADfo |
3.2 |
291kB |
|
| meM-INC |
DAQ system for incremental encoders and for the acquisition of frequencies (max. 32kHz),
available until April 2003 |
meM-INC |
3.2 |
322kB |
|
| meM-LOG |
From March 2009 on, the data logger has been substituted by a version allowing for the remote control via modem. |
meM-LOG-SE |
3.3 |
523kB |
|
| meM-PIO |
Since March 2005, the popular meM-PIO has been presenting itself in a new super
compact look. |
USB-PIO |
3.3 |
333kB |
|
| meM-PIO |
The meM-PIO integrated in a Sub-D connector shell was equipped with new firmware and a new name in November 2005: USB-PIO.
Via software however, the devices
must addressed as "meM-PIO" until revision number 4.1. |
USB-PIO |
4.1 |
562kB |
|
| MV-IF |
pulse forming 5B module for adjusting different input levels to a TTL input (German) |
MA-IF |
3.3 |
152kB |
|
| MV-U/I |
The 5B measuring amplifier for voltage and current is still used by a lot of customers. |
MA-UI |
3.3 |
246kB |
|
| MV-UNI |
Also still frequently used - the patented universal measuring amplifier in 5B standard. A detailled user
manual (PDF, 1.52MB) is provided. |
MA-UNI |
3.3 |
105kB |
|
| MVL |
In the meanwhile, our multi-purpose miniature amplifiers have been
replaced by the successors of the MAL series, too. |
MAL-xxx |
2.0 |
244kB |
|
| NextView®/NT |
This version of the professional software for data acquisition and processing is especially still available on demand for users of Windows® 95/98/Me/SE
and NT 4.0. A demo version and corresponding documentation can
be downloaded for free in our download archive. The full version requires a license number which is not free of charge. |
NextView®4 |
3.4 |
1.90MB |
|
| NVD |
NextView® (DOS) Demo 2.0, measuring and analysis software on MS-DOS (German) |
NextView®4 |
2.0 |
108kB |
|
| NVF |
option for the remote access to NextView® with iM1610 (DOS) (German) |
- |
- |
122kB |
|
| NVHD |
HD scan option (100kHz) for P1000NV (German) |
- |
- |
121kB |
|
| NVHDL |
HD scan option (100Hz) for NextView® Light (DOS) (German) |
- |
- |
122kB |
|
| NVL |
Light version of the measuring and analysis software NextView® (DOS) (German) |
NV4L |
2.0 |
123kB |
|
| NVLF |
option for the remote access to NextView® Light with iM805 (DOS) (German) |
- |
- |
122kB |
|
| OR8 |
power supply 9..30V instead of 9..40V at present |
OR8 |
2.1 |
241kB |
|
| P1000NV |
The ISA data acquisition card features 100kHz sampling rate because of the integrated RISC microcontroller.
In use for many years both under Windows® and MS-DOS (especially with NextView 2.5), it had an excellent reputation. |
- |
5.0 |
320kB |
|
| PC16TR |
The ISA data acquisition card has been discontinued since February 2002. It can easily be replaced by its successor. |
- |
5.0 |
357kB |
|
| PC20NHDL |
DAQ slot card PC20 with NextView® Light (DOS) (German) |
- |
5.0 |
102kB |
|
| PC20TR |
The chapter of ISA data acquisition cards from bmcm has been closed with selling the last PC20TR in March 2010. |
- |
5.0 |
664kB |
|
| PC104-AD12 |
PC/104 data acquisition card, 12 bit (German) |
PC104-AD16 |
2.1 |
849kB |
|
| PC104-CAN |
PC/104 interface card with 4x CAN (German) |
- |
2.4 |
384kB |
|
| PC104-CANCOM |
PC/104 interface card with 4x CAN, 2x COM (German) |
- |
2.4 |
384kB |
|
| PC104-COM |
PC/104 interface card with 2x COM (German) |
- |
2.4 |
384kB |
|
| PCI-BASE50 |
The "Light" version of the PCI multi-function card
with 50kHz sampling rate and 8 digital in-/outputs each is not available
anymore since August 2001. |
PCI-BASEII |
6.0 |
363kB |
|
| PCI-BASE300 |
To realize fastest sampling rates with the
latest MAD modules, the PCI-BASE300 (333kHz,
16 digital channels) has been replaced by the currently available PCI multi-function card in April 2003. |
PCI-BASEII |
6.0 |
363kB |
|
| PCI-BASE1000 |
This best-selling product got a "facelift" but remained fully compatible. New modules can still be used with the PCI-BASE1000. |
PCI-BASEII |
6.2 |
921kB |
|
| PCI-ZUDIO |
The plug-on board for the PCI-BASE1000 leads the digital channels of the DAQ card to the D-Sub37 female connector to be reached from the outside. |
- |
1.1 |
117kB |
|
| PD10 |
extension for the measuring cards PC20TR and P1000NV providing for the external connection of digital channels (German) |
ZUKA16 |
1.0 |
92kB |
|
| PIO |
The previous model of the digital I/O card is still used by many customers (German) |
USB-PIO |
2.0 |
341kB |
|
| PIO-C |
50-pole digital I/O interface card PIO with timer function (German) |
USB-PIO |
1.0 |
142kB |
|
| PIO24II |
data sheet of the 24-channel version of the popular PIO card |
USB-PIO |
3.1 |
333kB |
|
| PIO48II |
In November 2009, the era of the popular digital I/O cards as ISA slot card is finished. |
USB-PIO |
4.0 |
344kB |
|
| PIO48C-II |
special version of the PIO card with 3 integrated independent counter inputs (German) |
USB-PIO |
4.0 |
213kB |
|
| PW104A |
The special version A of the PC/104 power supply has been discontinued since August 2001. (German) |
PW104B |
3.1 |
103kB |
|
| PW104B |
reduced power supply for PC/104 power supplies from bmcm |
PW104B |
3.2 |
141kB |
|
| PW104C |
The special version C of the PC/104 power supply has been discontinued since August 2001. (German) |
PW104B |
3.1 |
103kB |
|
| PW104D |
reduced power supply for PC/104 power supplies from bmcm |
PW104B |
3.2 |
141kB |
|
| PW104D |
Since June 2009, we offer only one power supply version for PC/104 systems. For information about the PW104D, please see this data sheet. |
PW104B |
3.3 |
283kB |
|
| PW104E |
Since June 2009, we offer only one power supply version for PC/104 systems. For information about the PW104E, please see this data sheet. |
PW104B |
3.3 |
283kB |
|
| PW104O |
The add-on for PC/104 power supplies was available until June 2009. |
PW104B |
3.3 |
283kB |
|
| S-M9 |
semi-conductor sensor 0-5V, ±900G |
SC-M1000 |
- |
497kB |
|
| S-SG1 |
strain gage 120Ohm, ±1mm/m, aluminum K=2 |
SG-xxx |
- |
497kB |
|
| S-SG2 |
strain gage 120Ohm, ±1mm/m, steel K=2 |
SG-xxx |
- |
497kB |
|
| S-T4 |
temperature sensor (PT100) 0-5V, 0-300°C |
SC-TP300 |
- |
497kB |
|
| SA-LSP |
pair of light barriers for monitoring processes and facilities (German) |
- |
1.1 |
400kB |
|
| SC202 |
oscilloscope card with DIP switches (German) |
- |
3.1 |
210kB |
|
| SC202 |
The oscilloscope card is not available since June 2009. (German) |
- |
3.2 |
192kB |
|
| STRUM48 |
programming of µMeter 4 (UM4)
and 8a (UM8a) with Visual Basic (German) |
- |
- |
145kB |
|
| STRVB95 |
Drivers for Visual Basic. An installation guide (391kB) is provided. (German) |
- |
- |
109kB |
|
| UM4 |
data sheet of the 4-channel version of the LPT data acquisition system (German) |
- |
2.4 |
252kB |
|
| UM8 |
first version of the 8-channel LPT data acquisition system (German) |
- |
1.0 |
185kB |
|
| UM8a |
Since the LPT interface has been getting a bit long in the tooth, this extremely original measuring system is also retiring now. |
- |
2.4 |
174kB |
|
| upNV25 |
NextView® (DOS) update from version 2.0 to 2.5 (German) |
- |
2.5 |
91kB |
|
| ZU37BNC |
The measuring card adapter in aluminum housing was replaced by
connector boards with
different connector types and DIN rail carrier. |
ZU37xx |
1.0 |
251kB |
|
| ZU37K25 |
Connector panel with screw terminals, a Sub-D37 and a Sub-D25 female for direct connection to bmcm DAQ systems |
- |
1.0 |
79kB |
|
| ZUKA 25-37SS |
The connecting cable is not available since January 2005. |
- |
- |
53kB |
|
0049-8141-404180-2
0049-8141-404180-9
helpdesk
bmcm.de
LINKS