AMS42-LAN16fx
 1,999.00
AMS42-LAN16fx
AMS42-LAN16fx
AMS42-LAN16fx + Module
AMS42-LAN16fx komplett
AMS42-LAN16fx Front
AMS42-LAN16fx Front komplett
AMS42-LAN16fx Rückseite
AMS42-LAN16fx Seite
AMS42-LAN16fx oben
AMS42-LAN16fx unten
AMS42-LAN16fx Montage
AMS42-LAN16fx Netzwerk
AMS42-LAN16fx Zeit
Blockdiagramm
made_in_germany

All-In-One Measurement System. Compact. DAQ via LAN.

The AMS42-LAN16fx, a complete solution: amplifier technology and data acquisition. A high-quality network data acquisition system is already integrated. Available in a robust aluminum housing as a mobile tabletop unit with skid-proof, tip-up feet.

Modular Concept. Equip Individually. Be Flexible.

The AMS device is equipped with cassettes, on which the required 5B measuring amplifiers are mounted. The variety of available 5B modules allows for the optimum adaptation of the AMS42-LAN16fx to any special measuring task.

Choose Connector. Mount 5B Amplifier. Done.

The available plug-in cassettes have different connectors on the front panel. Depending on the sensor or signal to be connected, the suitable cassette can be chosen. Now the 5B module only has to be fixed on the cassette and be integrated in the AMS system.

Clearly Safe.

The galvanic isolation provided by the 5B modules guarantees interference-free operation and protects the DAQ system and the PC against high potentials.

16 Analog IN. 2 Analog OUT.

Signals are connected at 8 amplifier inputs with 16 bit resolution and 250kHz total sampling rate. Additional 8 analog inputs and 2 analog outputs are available directly and without amplification at a D-Sub 37 female.

32 Digital I/O. 3 Counters.

Digital states are recorded or set at 16 digital inputs and outputs each. The direction of the two 16-bit ports is set via software. Pulses, frequency, position, and pulse time can be measured with three 32-bit counters.

DAQ via Network. Remote. Ingenious.

The LAN technology of the AMS42-LAN16fx allows for measurement applications across great distances. The number of measuring points, where the devices are installed, is basically not limited. Data transmission to a server PC is fast and reliable.

Cascadable. Synchronizable.

The number of DAQ systems and with it the number of available channels is only limited by the bandwidth of the network. Several AMS42-LAN16fx devices can be synchronized with each other. If so, all measured data in distributed operation always keep time even with long-term measurements.

TCP/IP. Guaranteed Reliable.

The TCP/IP protocol stands for reliable data transmission - even via the internet.

Optimal for Windows.

The drivers and programming interface is optimized for 64Bit under Windows® 10/11. All software for installation and programming of the AMS42-LAN16fx is included free of charge.

NextView. Try for Free.

The DAQ system is supported by NextView, the software for data acquisition and analysis. A fully functional 14-day trial can be requested under www.nextview.de. So it is possible, to directly test the functionality of the device.

Versions and Options. Something for Everybody.

Other AMS versions, such as a 19" rack system, with an integrated USB data acquisition system, or as an amplifier system without a DAQ unit are available. With the add-on option AMS-EXT8, eight additional analog channels are provided, and eight opto-isolated digital inputs and relay outputs each with the option AMS-DIG8.

The most important functions in a nutshell. For technical details see the relating data sheet (PDF).

  •   5B compatible
  •   ½ x 19" 3U aluminum housing (42HP)
  •   8 amplifier inputs, 8 analog inputs (non-amplified)
  •   16 bit, max. 250kHz
  •   2 analog outputs (16 bit, ±10V)
  •   32 digital channels (2x16 bit, TTL/CMOS)
  •   3 counters (32 bit, max. 16 MHz) for pulse, incremental encoder, or pulse-time measurement
  •   power supply 12-40V
  •   TCP/IP Ethernet (Twisted Pair)
  •   synchronized to real-time
  •   individual plug-in cassettes installable per channel
  •   skid-proof, tip-up feet

Hardware and Software from One Hand

Drivers and programming support are naturally included with all DAQ systems for free and can be downloaded from this website.

Configuration with LAN-ADMIN

LAN data acquisition hardware of bmcm does not re­quire the installation of a device driver. When con­nec­ted to network, the DAQ system automatically self-assigns an IP address to be accessible by software. With the configuration software LAN Administration Utility, settings and connection can be tested and changed if necessary.

Simply NextView

For all who want to start right away: View and store signals, configure the measurement system, process measuring data and much more. 
Test all features of the data ac­qui­sition software 14 days for free! As a premium member of bmcm you can test all functionalitys of NextView for 30 days. 
Next...

Simply LIBAD

Programming leanly and quickly: Use bmcm data acquisition systems in your own programs. The hardware independent programming interface (API) LIBAD4 is available as DLL in 64 Bit (Windows 10/11).
Next...

AMS84-LAN16fx

AMS84-LAN16fx
Amplifier Measurement System for 16x 5B modules (LAN)
 1,999.00

AMS42-USB

AMS42-USB
Amplifier Measurement System for 8x 5B modules (USB)
 1,399.00

AMS42

AMS42
Amplifier Measurement System for 8x 5B modules
 799.00

LAN-AD16fx

LAN-AD16fx
LAN data acquisition system (250kHz, 16 bit), PoE
 999.00

AMS-OI16CO

AMS-OI16CO
AMS extension (16 IN, 16 OUT, isolated)
 599.00

AMS-OI16RS

AMS-OI16RS + Gehäuse
AMS extension (3 incremental encoder IN, 4 IN, 16 OUT, isolated)
 1,199.00

AMS-K-CO5

AMS-K-CO5
AMS cassette for 5-pin pluggable terminal block
 59.00

AMS-K-BIN5

AMS-K-BIN5
AMS cassette with 5-pin Binder socket
 99.00

AMS-K-BNC

AMS-K-BNC
AMS cassette with BNC socket
 99.00

AMS-K-THK

AMS-K-THK
AMS cassette with socket for thermocouple (type K)
 99.00

AMS-K-BLANK

AMS-K-BLANK
AMS blank panel
 12.00

AMS-EXT8

AMS-EXT8 für AMS42
AMS extension (8 additional 5B slots)
 389.00

AMS-DIG8

AMS-DIG8
AMS extension (8 Dig IN, 8 Dig OUT, isolated)
 579.00

AMS-HANDLE2

AMS-HANDLE2
AMS metal handles (2 pcs.)
 99.00

MA-UNI

MA-UNI
5B universal amplifier for U, I, R, AC, SG, CF
 249.00

MA-UI

MA-UI
5B amplifier for voltage/ current, 9 measuring ranges
 199.00

MA-U

MA-U
5B amplifier for voltage, 50kHz, 4 measuring ranges
 139.00

ZU-PW40W

ZU-PW40W
Desktop power supply (24V, 40W)
 59.00

NV5

NV PRO
NextView 5 Professional (single license)
 999.00

NV5LITE

NV Lite
NextView 5 Lite (single license)
 249.00

ZU5STL

ZU5STL
Screw-type terminal blocks (5-pin) with pull relief
 35.00

ZUKA-TP

ZUKA-TP
Twisted Pair cable
 12.00

ZUKA37 Line

ZUKA37SB
D-Sub 37 connecting cable (male/female or male/male)
 29.00

Go back