AMS84-LAN16fx
 1,699.00
AMS84-LAN16fx
AMS84-LAN16fx
AMS84-LAN16fx + Module
AMS84-LAN16fx komplett
AMS84-LAN16fx Front
AMS84-LAN16fx Front komplett
AMS84-LAN16fx Rückseite
AMS84-LAN16fx Seite
AMS84-LAN16fx oben
AMS84-LAN16fx unten
AMS84-LAN16fx Montage
AMS84-LAN16fx Netzwerk
AMS84-LAN16fx Zeit
Blockdiagramm

All-In-One Measurement System. 19 Inches. DAQ via LAN.

The AMS84-LAN16fx, a complete solution: amplifier technology and data acquisition. A high-quality network data acquisition system is already integrated. Available as a stationary version for installation in 19" rack systems.

Modular Concept. Equip Individually. Be Flexible.

The AMS device is equipped with cassettes, on which the required 5B measuring amplifiers are mounted. The variety of available 5B modules allows for the optimum adaptation of the AMS84-LAN16fx to any special measuring task.

Choose Connector. Mount 5B Amplifier. Done.

The available plug-in cassettes have different connectors on the front panel. Depending on the sensor or signal to be connected, the suitable cassette can be chosen. Now the 5B module only has to be fixed on the cassette and be integrated in the AMS system.

Clearly Safe.

The galvanic isolation provided by the 5B modules guarantees interference-free operation and protects the DAQ system and the PC against high potentials.

16 Analog IN. 2 Analog OUT.

Signals are connected at 16 amplifier inputs with 16 bit resolution and 250kHz total sampling rate. The two ±10V outputs can be used for analog controls with 16 bit accuracy.

32 Digital I/O. 3 Counters.

Digital states are recorded or set at 16 digital inputs and outputs each. The direction of the two 16-bit ports is set via software. Pulses, frequency, position, and pulse time can be measured with three 32-bit counters.

DAQ via Network. Remote. Ingenious.

The LAN technology of the AMS84-LAN16fx allows for measurement applications across great distances. The number of measuring points, where the devices are installed, is basically not limited. Data transmission to a server PC is fast and reliable.

Cascadable. Synchronizable.

The number of DAQ systems and with it the number of available channels is only limited by the bandwidth of the network. Several AMS84-LAN16fx devices can be synchronized with each other. If so, all measured data in distributed operation always keep time even with long-term measurements.

TCP/IP. Guaranteed Reliable.

The TCP/IP protocol stands for reliable data transmission - even via the internet.

Open for Everyone.

Widely supported: The amplifier measurement system can be used under Windows XP/7/8/10 as well as under Mac OS X, Free BSD, and Linux. The complete software for installation and programming of the AMS84-LAN16fx is included for free.

NextView. Try for Free.

The device is supported by NextView, the software for data acquisition and analysis. A fully functional 30-day trial is included with delivery to directly test the functionality of the AMS84-LAN16fx.

Versions and Options. Something for Everybody.

Other AMS versions, such as a ½ x 19-inch table-top unit, with an integrated USB data acquisition system, or as an amplifier system without a DAQ unit are available. With the add-on option AMS-DIG8, eight opto-isolated digital inputs and relay outputs each are provided.

The most important functions in a nutshell. For technical details see the relating data sheet (PDF).

  •   5B compatible
  •   19" 3U aluminum housing (84HP)
  •   16 analog inputs
  •   16 bit, max. 250kHz
  •   2 analog outputs (16 bit, ±10V)
  •   32 digital channels (2x16 bit, TTL/CMOS)
  •   3 counters (32 bit, max. 16 MHz) for pulse, incremental encoder, or pulse-time measurement
  •   power supply 12-40V
  •   TCP/IP Ethernet (Twisted Pair)
  •   synchronized to real-time
  •   individual plug-in cassettes installable per channel

Hardware and Software from One Hand

Drivers, programming support for Windows, Mac OS X, FreeBSD, and Linux, as well as a 30-day full version of the measurement software NextView are included with all DAQ systems for free and can be downloaded from this website.

Configuration with LAN-ADMIN

LAN data acquisition hardware of bmcm does not re­quire the installation of a device driver. When con­nec­ted to network, the DAQ system automatically self-assigns an IP address to be accessible by software. With the configuration software LAN Administration Utility, settings and connection can be tested and changed if necessary.

Simply NextView

For all who want to start right away: View and store signals, configure the measurement system, process measuring data and much more. 
Test all features of the data ac­qui­sition software 30 days for free! 
Next...

Simply LIBAD

Programming leanly and quickly: Use bmcm data acquisition systems in your own programs. The hardware independent programming interface (API) LIBAD is available as DLL in 32 Bit (Windows XP+, MacOS, Linux).
Next...

Or LabView VI's

You are using LabVIEW™? Also possible with data acquisition hardware from bmcm. LabVIEW VI's for our DAQ systems are included with the delivery as well or free for download. 
Next...

AMS42-LAN16fx

AMS42-LAN16fx
Amplifier Measurement System for 8x 5B modules (LAN)
 1,399.00

AMS84-USB

AMS84-USB
Amplifier Measurement System for 16x 5B modules (USB)
 1,299.00

AMS84

AMS84
Amplifier Measurement System for 16x 5B modules
 899.00

LAN-AD16fx

LAN-AD16fx
LAN data acquisition system (250kHz, 16 bit), PoE
 899.00

AMS-OI16CO

AMS-OI16CO
AMS extension (16 IN, 16 OUT, isolated)
 449.00

AMS-OI16RS

AMS-OI16RS + Gehäuse
AMS extension (3 incremental encoder IN, 4 IN, 16 OUT, isolated)
 849.00

AMS-K-CO5

AMS-K-CO5
AMS cassette for 5-pin pluggable terminal block
 49.00

AMS-K-BIN5

AMS-K-BIN5
AMS cassette with 5-pin Binder socket
 79.00

AMS-K-BNC

AMS-K-BNC
AMS cassette with BNC socket
 79.00

AMS-K-THK

AMS-K-THK
AMS cassette with socket for thermocouple (type K)
 79.00

AMS-K-BLANK

AMS-K-BLANK
AMS blank panel
 9.00

AMS-DIG8

AMS-DIG8
AMS extension (8 Dig IN, 8 Dig OUT, isolated)
 449.00

ZU-PW40W

ZU-PW40W
Desktop power supply (24V, 40W)
 49.00

AMS-HANDLE2

AMS-HANDLE2
AMS metal handles (2 pcs.)
 79.00

AMS-FOOT

AMS-FOOT
AMS device feet with front tip-up feet (1 set)
 29.00

MA-UNI

MA-UNI
5B universal amplifier for U, I, R, AC, SG, CF
 199.00

MA-UI

MA-UI
5B amplifier for voltage/ current, 9 measuring ranges
 149.00

MA-U

MA-U
5B amplifier for voltage, 50kHz, 4 measuring ranges
 109.00

ZU5STL

ZU5STL
Screw-type terminal blocks (5-pin) with pull relief
 29.00

NV4

NV4
NextView 4 Professional (single license)
 899.00

NV4LITE

NV4LITE
NextView 4 Lite (single license)
 149.00

ZUKA-TP

ZUKA-TP
Twisted Pair cable
 9.00

ZUKA37 Line

ZUKA37SB
D-Sub 37 connecting cable (male/female or male/male)
 19.00

Go back