AMS84-USB
 1,699.00
AMS84-USB
AMS84-USB
AMS84-USB mit Modulen
AMS84-USB komplett
AMS84-USB Front
AMS84-USB Front komplett
AMS84-USB Rückseite
AMS84-USB Seite
AMS84-USB oben
AMS84-USB unten
AMS84-USB Montage
Blockdiagramm
made_in_germany

All-In-One Measurement System. 19 Inches. DAQ via USB.

The AMS84-USB, a complete solution: amplifier technology and data acquisition. A high-quality USB data acquisition system is already integrated. Available as a stationary version for installation in 19" rack systems.

Modular Concept. Equip Individually. Be Flexible.

The AMS device is equipped with cassettes, on which the required 5B measuring amplifiers are mounted. The variety of available 5B modules allows for the optimum adaptation of the AMS84-USB to any special measuring task.

Choose Connector. Mount 5B Amplifier. Done.

The available plug-in cassettes have different connectors on the front panel. Depending on the sensor or signal to be connected, the suitable cassette can be chosen. Now the 5B module only has to be fixed on the cassette and be integrated in the AMS system.

Clearly Safe.

The galvanic isolation provided by the 5B modules guarantees interference-free operation and protects the DAQ system and the PC against high potentials.

Analog. 16 Inputs. 2 Outputs.

Signals are connected at 16 amplifier inputs with 16 bit resolution and 250kHz total sampling rate. The two ±10V outputs can be used for analog controls with 16 bit accuracy.

Digital. 4 Inputs. 4 Outputs. 1 Counter.

Digital states are recorded or set at four digital inputs and outputs each. For pulse measurements, an additional isolated counter input is provided.

Plug & Play with USB

The connection to the PC is realized via USB. The AMS84-USB provides all typical USB features (e.g. Plug & Play, Hot-Plug).

Optimal for Windows.

The drivers and programming interface is optimized for 64Bit under Windows® 10/11. All software for installation and programming of the AMS84-USB is included free of charge.

NextView. Try for Free.

The DAQ system is supported by NextView, the software for data acquisition and analysis. A fully functional 14-day trial can be requested under www.nextview.de. So it is possible, to directly test the functionality of the device.

Versions and Options. Something for Everybody.

Other AMS versions, such as a ½ x 19-inch table-top unit, with an integrated LAN data acquisition system, or as an amplifier system without a DAQ unit are available. With the add-on option AMS-DIG4, four opto-isolated digital inputs and relay outputs each are provided.

The most important functions in a nutshell. For technical details see the relating data sheet (PDF).

  •   5B compatible
  •   19" 3U aluminum housing (84HP)
  •   16 analog inputs
  •   16 bit, max. 250kHz, isolated
  •   2 analog outputs (16 bit, ±10V)
  •   4 digital inputs and outputs each (TTL/CMOS)
  •   1 counter (16 bit, isolated)
  •   9-40V power supply
  •   individual plug-in cassettes installable per channel

Hardware and Software from One Hand

Drivers and programming support are naturally included with all DAQ systems for free and can be downloaded from this website.

bmcm Driver Package

USB/PCI/PCIe data acquisition hardware always requires the installation of a device driver to be accessible by software. By providing a free bmcm driver package, the device installation has to be done only once - additional DAQ hardware is installed automatically. 

Simply NextView

For all who want to start right away: View and store signals, configure the measurement system, process measuring data and much more. 
Test all features of the data ac­qui­sition software 14 days for free! As a premium member of bmcm you can test all functionalitys of NextView for 30 days. 
Next...

Simply LIBAD

Programming leanly and quickly: Use bmcm data acquisition systems in your own programs. The hardware independent programming interface (API) LIBAD4 is available as DLL in 64 Bit (Windows 10/11).
Next...

AMS42-USB

AMS42-USB
Amplifier Measurement System for 8x 5B modules (USB)
 1,399.00

AMS84-LAN16fx

AMS84-LAN16fx
Amplifier Measurement System for 16x 5B modules (LAN)
 1,999.00

AMS84

AMS84
Amplifier Measurement System for 16x 5B modules
 1,199.00

USB-AD16f

USB data acquisition system (250kHz, 16 bit, isolated)
 499.00

AMS-K-CO5

AMS-K-CO5
AMS cassette for 5-pin pluggable terminal block
 59.00

AMS-K-BIN5

AMS-K-BIN5
AMS cassette with 5-pin Binder socket
 99.00

AMS-K-BNC

AMS-K-BNC
AMS cassette with BNC socket
 99.00

AMS-K-THK

AMS-K-THK
AMS cassette with socket for thermocouple (type K)
 99.00

AMS-K-BLANK

AMS-K-BLANK
AMS blank panel
 12.00

AMS-DIG4

AMS-DIG4
AMS extension (4 Dig IN, 4 Dig OUT, isolated)
 449.00

ZU-PW40W

ZU-PW40W
Desktop power supply (24V, 40W)
 59.00

AMS-HANDLE2

AMS-HANDLE2
AMS metal handles (2 pcs.)
 99.00

AMS-FOOT

AMS-FOOT
AMS device feet with front tip-up feet (1 set)
 38.00

MA-UNI

MA-UNI
5B universal amplifier for U, I, R, AC, SG, CF
 249.00

MA-UI

MA-UI
5B amplifier for voltage/ current, 9 measuring ranges
 199.00

MA-U

MA-U
5B amplifier for voltage, 50kHz, 4 measuring ranges
 139.00

ZU5STL

ZU5STL
Screw-type terminal blocks (5-pin) with pull relief
 35.00

NV5

NV PRO
NextView 5 Professional (single license)
 999.00

NV5LITE

NV Lite
NextView 5 Lite (single license)
 249.00

ZUKA37 Line

ZUKA37SB
D-Sub 37 connecting cable (male/female or male/male)
 29.00

Go back