LAN-AD16fx
 999.00
LAN-AD16fx
LAN-AD16fx
LAN-AD16fx hinten
LAN-AD16fx vorne
LAN-AD16fx Seite
LAN-AD16fx oben
LAN-AD16fx Netzwerk
LAN-AD16fx Zeit
Blockdiagramm
made_in_germany

16 Analog IN. 2 Analog OUT.

16 analog inputs can be sampled with 16 bit resolution and 250kHz total sampling rate. The measuring range (±10V, ±5V, ±2V, ±1V) is selected via software for each channel separately. The two ±10V outputs can be used for analog controls with 16 bit accuracy.

32 Digital I/O.

Digital states are recorded or set at 32 digital inputs or outputs. The direction of the two 16-bit ports is set via software.

DAQ via Network. Remote.

The LAN technology of the LAN-AD16fx allows for measurement applications across great distances. The number of measuring points, where the devices are installed, is basically not limited. Data transmission to a server PC is fast and reliable.

Count and measure: Pulses. Frequency. Position. Period.

If for the acquisition of large quantities, speed measure­ment, or determination of position: These are only a few applications the three 32-bit counters of the LAN-AD16fx can be used for. With the pulse time feature, precise measuring e.g. at slowly rotationg shafts is possible.

PoE. Self-supplier.

The device can be supplied with power via network (Power over Ethernet). This reduces cabling efforts to a minimum and makes mobile measurements a lot easier.

Optimal for Windows.

The drivers and programming interface is optimized for 64Bit under Windows® 10/11. All software for installation and programming of the LAN-AD16fx is included free of charge.

NextView. Try for Free.

The DAQ system is supported by NextView, the software for data acquisition and analysis. A fully functional 14-day trial can be requested under www.nextview.de. So it is possible, to directly test the functionality of the device.

All-In-One. You Have the Choice.

You want a complete system including DAQ and signal conditioning? No problem: A LAN data acquisition system is integrated in the amplifier measurement systems AMS42-LAN16fx and AMS84-LAN16fx.

TCP/IP. Guaranteed Reliable.

The LAN-AD16fx uses the TCP/IP protocol providing for safe and complete data transmission. Besides that, transmission via internet is possible - data acquisition with absolutely new possibilities.

Cascadable. Synchronizable.

The number of DAQ systems and with it the number of available channels is only limited by the bandwidth of the network. Several LAN-AD16fx devices can be synchronized with each other. If so, all measured data in distributed operation always keep time even with long-term measurements.

The most important functions in a nutshell. For technical details see the relating data sheet (PDF).

  •   16 analog inputs (16 bit, ±10V, ±5V, ±2V, ±1V)
  •   total sampling rate 250kHz
  •   2 analog outputs (16 bit, ±10V)
  •   32 digital channels (2x16 bit, TTL/CMOS)
  •   3 counters (32 bit, max. 16 MHz) for pulse, incremental encoder, or pulse-time measurement
  •   power supply via network (PoE) or externally with 12-40V
  •   galvanically isolated to LAN, power supply
  •   TCP/IP Ethernet (Twisted Pair)
  •   synchronized to real-time

Hardware and Software from One Hand

Drivers and programming support are naturally included with all DAQ systems for free and can be downloaded from this website.

Configuration with LAN-ADMIN

LAN data acquisition hardware of bmcm does not re­quire the installation of a device driver. When con­nec­ted to network, the DAQ system automatically self-assigns an IP address to be accessible by software. With the configuration software LAN Administration Utility, settings and connection can be tested and changed if necessary.

Simply NextView

For all who want to start right away: View and store signals, configure the measurement system, process measuring data and much more. 
Test all features of the data ac­qui­sition software 14 days for free! As a premium member of bmcm you can test all functionalitys of NextView for 30 days. 
Next...

Simply LIBAD

Programming leanly and quickly: Use bmcm data acquisition systems in your own programs. The hardware independent programming interface (API) LIBAD4 is available as DLL in 64 Bit (Windows 10/11).
Next...

USB-AD16f

USB data acquisition system (250kHz, 16 bit, isolated)
 499.00

AMS42-LAN16fx

AMS42-LAN16fx
Amplifier Measurement System for 8x 5B modules (LAN)
 1,999.00

AMS84-LAN16fx

AMS84-LAN16fx
Amplifier Measurement System for 16x 5B modules (LAN)
 1,999.00

NV5

NV PRO
NextView 5 Professional (single license)
 999.00

NV5LITE

NV Lite
NextView 5 Lite (single license)
 249.00

OI16

OI16 schraeg
Optocoupler card (16 IN 1..30V, 16 OUT 1..30V)
 189.00

ZUKA-TP

ZUKA-TP
Twisted Pair cable
 12.00

ZUKA37 Line

ZUKA37SB
D-Sub 37 connecting cable (male/female or male/male)
 29.00

ZU-CS250R

ZU-CS250R
Current shunt, 250 Ohm
 12.00

ZU-PW40W

ZU-PW40W
Desktop power supply (24V, 40W)
 59.00

ZU-SCHI

ZU-SCHI
Wall or DIN rail fastening kit
 12.00

ZU-PBOX-LAN

ZU-PBOX-LAN
Waterproof plastic housing for LAN devices
 499.00

ZU37BB

Connector panel (16x BNC, 37x 4mm banana jacks)
 159.00

ZU37CB

Connector panel (18x terminal connectors, 37x banana jacks)
 159.00

ZU37CO

Connector panel (18x terminal connectors)
 99.00

Go back