USB-AD14f

USB-AD14f

€ 249.00

Quantity:

Measurement & Control. Super-Low Priced.

Record and output signals with the USB-AD14f. The USB data acquisition system accomodated in a stable aluminum housing is ideal for medium-class applications impressing by universal applicability and an excellent price-performance-ratio.

16 Analog IN. 20kHz. 14 Bit. ±10V.

Voltage signals in the ±10V range are connected at 16 analog inputs. Sampling is done with 14 bit resolution and 20kHz total sampling rate.

1 Analog OUT. 12 Bit. ±5V.

The 5V output can be used for analog control with 12 bit accuracy.

8 Digital IN. 8 Digital OUT. 1 Counter.

Digital states are recorded or controlled at eight digital inputs and outputs each. Digital inputs are sampled time-synchronously with the analog inputs. The USB-AD14f features a 16-bit counter for the acquisition of counting pulses.

Plug & Play.

The connection to the PC is realized via USB. The USB-AD14f provides all typical USB features (e.g. Plug&Play, Hot-Plug). Up to 127 devices can be connected and installed during operation.

Powered by USB.

The device is supplied with power via the USB interface. This reduces cabling efforts to a minimum and makes mobile measurements a lot easier.

Optimal for Windows.

The drivers and programming interface is optimized for 64Bit under Windows® 10/11. All software for installation and programming of the USB-AD14f is included free of charge.

NextView. Try for Free.

The DAQ system is supported by NextView, the software for data acquisition and analysis. A fully functional 14-day trial can be requested under www.nextview.de. So it is possible, to directly test the functionality of the device.

Accessory. Makes Everything so Easy.

Use the demo board ZU-DBD featuring various operating controls and sensors to generate 16 analog signals and record them with the USB data acquisition system.

The most important functions in a nutshell. For technical details see the relating data sheet (PDF).

16 analog inputs (14 bit, ±10V)
max. sampling rate 20kHz
1 analog output (12 bit, ±5V)
8 digital inputs and outputs each (TTL/CMOS)
16-bit counter
bus-powered
USB 2.0, full-speed

Hardware and Software from One Hand

Drivers and programming support are naturally included with all DAQ systems for free and can be downloaded from this website.

bmcm Driver Package

USB/PCI/PCIe data acquisition hardware always requires the installation of a device driver to be accessible by software. By providing a free bmcm driver package, the device installation has to be done only once - additional DAQ hardware is installed automatically.

Simply NextView

For all who want to start right away: View and store signals, configure the measurement system, process measuring data and much more.
Test all features of the data acquisition software 14 days for free! As a premium member of bmcm you can test all functionalitys of NextView for 30 days.
Next...

Simply LIBAD

Programming leanly and quickly: Use bmcm data acquisition systems in your own programs. The hardware independent programming interface (API) LIBAD4 is available as DLL in 64 Bit (Windows 10/11).
Next...

Datenblatt - USB data acquisition system USB-AD14f (v. 1.0.1)

BMCM - Drivers for Windows 10 / 11

Software - Driver package for bmcm data acquisition hardware (v. 5.1.606)

You are looking for drivers for older windows versions? You can find them in the download archive.

NextView - Measurement Software

Handbuch - User manual for NextView® 5 (v. 5.0)
Software - Installation of NextView® 5.1 (Pro, Lite, Analysis, Trial) (64bit) (v. 5.1.592)

LIBAD - Programming Interface (API)

Handbuch - Library for programming interface LIBAD4 (v. 5.0)
Software - Programming interface LIBAD4 API für Windows® (v. 5.0.584)

Go back