32 Channels. Galvanically Isolated. Monitor & Control.
Record and output digital signals electrically isolated. The USB-OI16 features two 16-bit ports with 16 digital inputs and outputs each. Besides that, up to 2 counters or incremental encoders can be connected at the first digital inputs. The integrated pulse time measurement function produces precise results especially in the low-frequency range.
16 Optocoupler Inputs. 16 Semiconductor Switches.
16 digital states in the 3..32V voltage range can be sampled and recorded. The 16 semiconductor switches of the USB-OI16 are realized with high-side drivers for voltages in the 5..32V range.
The state of the input and output lines is indicated by LEDs.
Count and Measure: Pulses. Frequency. Position. Period.
If for the acquisition of large quantities, speed measurement, or determination of position: These are only a few applications the two 32-bit counters (incremental decoders) of the USB-OI16 can be used for. The integrated pulse time measurement function produces precise results especially in the low-frequency range.
The digital channels of the application-specific hardware (sensor, machine, etc.) are connected at a 37-pin D-Sub female.
Plug & Play.
The connection to the PC is realized via USB. The USB-OI16 provides all typical USB features (e.g. Plug&Play, Hot-Plug). Up to 127 devices can be connected and installed during operation.
The device is internally supplied with 5V provided by the USB interface. This reduces cabling efforts to a minimum and makes mobile measurements a lot easier. An external supply unit can be connected for higher output switching voltages at the digital outputs (7..32V).
Open for Everyone.
Widely supported: The USB-OI16 can be used under Windows XP/7/8/10 as well as under Mac OS X, Free BSD, and Linux. The complete software for installation and programming of the USB-OI16 is included for free.
NextView 4. Try for Free.
The DAQ system is supported by NextView 4, the software for data acquisition and analysis. A fully functional 30-day trial is included with delivery to directly test the functionality of the USB-OI16.
DIN Rail Mounting.
The optocoupler system is suitable for DIN rail mounting. A DIN rail carrier with bracket is already included with the delivery.